Planters, Seeders & Ridgers
Multi-Crop Seed Drill
A drill with about 80–100 kg of seed capacity that works at a set depth of 50–100 mm.
- Seed and fertiliser together
- 80–100 kg hopper
- Set depth
About this product
How the Multi-Crop Seed Drill works
A multi-crop seed drill sows and fertilises at the same time, so the field is covered in one trip rather than two. Placing seed and fertiliser together in a single pass saves fuel and time, and it gives more even results than broadcasting by hand.
The hopper holds roughly 80 to 100 kg of seed, and the drilling depth can be set between 50 and 100 mm to suit the crop. Send us the crop and the row spacing you need and we will confirm the working width and tractor power for the current model.
Calibrate the drill before the season: sow over a measured distance, weigh what came out and adjust the rate until it matches your target. Match the drilling depth, which can be set between 50 and 100 mm, to the seed size, and keep the hopper topped up so seed does not run short mid-row.
Before you buy the Multi-Crop Seed Drill
A seed drill gives even depth and spacing that broadcasting cannot match. Because it can seed and fertilise together, it saves a pass and keeps nutrients close to the roots. Check the seed capacity against the size of your fields, so you are not stopping to refill every few minutes.
Specifications
Specifications
Multi-Crop Seed Drill: the specifications
| Seed Capacity | About 80 – 100 kg |
|---|---|
| Drilling Depth | 50 – 100 mm |
| Operation | Seeding and fertilising in one pass |
Sizes available
Need another size of the Multi-Crop Seed Drill?
Ask about sizesKey features
Key features of the Multi-Crop Seed Drill
Seed and fertiliser together
One pass instead of two.
80–100 kg hopper
Holds enough seed for long runs.
Set depth
Drilling depth from 50 to 100 mm.
Questions
Questions about the Multi-Crop Seed Drill
Yes, seeding and fertilising happen in one pass, which saves a trip across the field and keeps fertiliser close to the seed row.
